CleanerVinyl ProXL System:

CleanerVinyl
​ProXL System:

All the great features of the Pro System, but much bigger. Fits on 15 liter ultrasonic cleaners. Give your records the space and cleaning fluid volume they deserve!

• Uses a large 15 liter ultrasonic cleaner. This enables wide spacing of the records, while ensuring high throughput.
• Clean up to 8 records per batch at a full 1 inch spacing. This ensures efficient cleaning fluid access and optimizes the ultrasonic cleaning process!
• Or clean up to 14 or 25 records at 0.5 inch or 0.25 inch spacing to maximize throughput.
• Easy vertical loading through removable ProXL motor unit. Mount your records wherever convenient and run the cleaner in a different location.
• Expandable: The ProXL Motor Unit gets you started. It can be directly put on the rim of a 15 liter cleaner. Add more ProXL components as you need them.
• ​Add the CleanerVinyl Lift-ProXL accessory, which enables raising the records into a drying position for air drying with the integrated fan. This reduces 'sleeve-to-sleeve' time to less than 35 min. The tank does not need to be drained for the drying process.
• Get superior audiophile cleaning results with the CleanerVinyl Micron 15 Liter cleaning fluid filtration system. Circulates the cleaning fluid through a 1 micron particle filter during the cleaning process, which means...
  • ...no more re-deposition of dirt. Get ultra-clean records!
  • ...you can use your cleaning fluid for many batches of records before replacing it. No more draining and filling of the tank during cleaning sessions.

This video demonstrates
​the ProXL System:

This video introduces the Micron filtration system:

ProXL System Complete Kits

Shop ProXL System Kits

ProXL System Components

Shop ProXL System Components

CleanerVinyl ProXL System is guaranteed to fit on these ultrasonic cleaners:

We guarantee that the ProXL System will fit to the PS-60A 40kHz and the UC-8360 132kHz high-frequency ultrasonic cleaners.
Both units have 6 transducers and an ultrasonic cleaning power of 360W.
The ProXL design enables dual-frequency cleaning if both cleaners are incorporated into the cleaning setup. Simply run the ProXL motor unit directly on the rim of the PS-60A for an effective 40kHz pre-clean that removed coarse dirt, then lift the spinning motor unit with the records over to the UC-8360 and finish the clean at 132kHz, ensuring that the cavitation reaches down into the smallest features of the grooves and that chemical residue is properly removed.
The ProXL System will also fit to many other standard shaped 15 liter cleaners on the market today.
Please, visit our ultrasonic cleaner page for more info and purchasing of this cleaner model.