Get a kit discount, 3 FREE Micron filters and a FREE set of ProXL 1/4" Spacers:
|
The ProXL Ultimate Kit is our state-of-the-art solution for high-throughput ultrasonic vinyl record cleaning. It includes the Lift-ProXL air drying accessory and the Micron 15 Liter fluid filtration system.
Clean 8 records at a full 1 inch spacing (or 14 records at 0.5 inch) in Micron filtered cleaning fluid. This eliminates redeposition of dirt, while ensuring maximum access of the ultrasonic cleaning power to your records. The Lift-ProXL air drying system cuts total sleeve-to-sleeve times to about 35 min. The Lift-ProXL system also ensures that you will never have to handle a wet record. The Micron filtration system uses an industry leading 1 micron rated high-capacity filter, which will last for many batches of records, while strongly reduce the need for exchanging the fluid. |
The Max Ultimate Kit consists of:
Please, note that this kit does not include the ultrasonic cleaner. Please, see here for more info.
International Shipping: Please, see here for details. Contact us at info@cleanervinyl.com if you have questions.
|
Get a kit discount and a FREE set of ProXL 1/4" Spacers:
|
The ProXL Expert Kit combines the ProXL motor unit with the Lift-ProXL accessory for fast and convenient air drying of the records. Go 'sleeve-to-sleeve' in about 35 min and never touch a wet record.
The generous 1 or 0.5 inch spacing between the records ensures audiophile level cleaning results, while the large footprint of the ProXL on a capacious 15 liter ultrasonic ensures high throughput at 8 or 14 records per batch. |
The Max Expert Kit consists of:
Please, note that this kit does not include the ultrasonic cleaner. Please, see here for more info.
International Shipping: Please, see here for details. Contact us at info@cleanervinyl.com if you have questions.
|
CleanerVinyl ProXL System is guaranteed to fit on these ultrasonic cleaners:
|
We guarantee that the ProXL System will fit to the PS-60A 40kHz and the UC-8360 132kHz high-frequency ultrasonic cleaners.
Both units have 6 transducers and an ultrasonic cleaning power of 360W. The ProXL design enables dual-frequency cleaning if both cleaners are incorporated into the cleaning setup. Simply run the ProXL motor unit directly on the rim of the PS-60A for an effective 40kHz pre-clean that removed coarse dirt, then lift the spinning motor unit with the records over to the UC-8360 and finish the clean at 132kHz, ensuring that the cavitation reaches down into the smallest features of the grooves and that chemical residue is properly removed. The ProXL System will also fit to many other standard shaped 15 liter cleaners on the market today. Please, visit our ultrasonic cleaner page for more info and purchasing of this cleaner model. |