All Components of the CleanerVinyl Easy3 System are Available Individually:
- CleanerVinyl Easy3: Combines a motor unit that can spin 3 records at a time with an integrated lift enabling positioning the records in a drying position outside the fluid. Easy3 has integrated RPM control (~0.5-3 RPM) and a 7"singles adapter.
- CleanerVinyl Dry: Lift the records out of the water after the clean, then turn on the fan for rapid drying. Go 'sleeve-to-sleeve' in ~45 min. Never touch a wet record.
- CleanerVinyl Micron 6 liter: Continuously filters the cleaning fluid through a 1 micron particle filter. Dramatically reduces redeposition and you can use the cleaning fluid for many runs before replacing it.
CleanerVinyl Easy3 can clean up to 3 records per run. It installs directly on the rim of the ultrasonic cleaner. Easy3 features an integrated drying position, RPM control (~0.5-3 RPM), and a built-in 7" singles adapter.
Accelerates the drying process. Lift the Easy3 motor unit into the drying position and plug in the fan. Use the included drain hose for convenient emptying of the ultrasonic cleaner after the cleaning session is over.
CleanerVinyl Micron 6 Liter
Continuously filters the cleaning fluid through a 1 micron particle filter. Cycles the entire tank every ~4 min. Dramatically reduces re-deposition. Use the cleaning fluid for many runs before it needs replacing.
CleanerVinyl Easy3 System fits the widely available 6 liter PS-30A cleaner: